UP'N'DOWN
Use the overhead space of your
store with the Up'N'Down model that goes up to the ceiling at a 45º angle. Load orders at the "nose" of the conveyor on ground level, and store them off the floor. Add extra square footage by using valuable floor space under the conveyor.

Up'N'Down Features:
• Bi-directional hand switch - standard
• Series 540 Automatic Keyboard control - optional.
Microprocessor control, selects shortest route to item location.
• 10 slot stamped steel frame, 12" pitch, 1.2# each,
with nylon inserts.
• Hardened steel universal with heat treated steel insert bushing.
• Screw type take up for chain slack adjustment.

V-DIP
The side loading V-Dip takes up the space of one garment (± 2') on the floor...but uses all available overhead space. Ideal for a narrow call office,
or where space is at a premium, the
V-Dip takes advantage of your store's cubic capacity, while using minimum square footage.

 

 

 V-Dip Features:
• Bi-directional hand switch - standard
• Series 540 Automatic Keyboard control - optional.
Microprocessor control, selects shortest route to item location.
• 10 slot stamped steel frame, 12" pitch, 1.2# each, with nylon inserts.
• Hardened steel universal with heat treated steel insert bushing.


DOUBLE DECK UP'N'DOWN
The best of both worlds-two tiers of garments, plus storage overhead. Ideal for shirt storage, or locations with high ceilings. The Double Deck Up'N'Down provides maximum storage in minimum space, an innovative design that supplies a double density of hanging for today's busy stores.

 

 

Double Deck Up'N'Down Features:
• Bi-directional hand switch - standard
• Series 540 Automatic Keyboard control - optional. Microprocessor control, selects shortest route to item location.
• 10 slot stamped steel frame, 12" pitch, 1.2# each, with nylon inserts.
• Powder coated drop rod each frame, removable lower nylon frame.
• Hardened steel universal with heat treated steel insert bushing.


STOR-U-VEYOR
Storage with SLOTS...the most popular design of conveyor. Convenient identification of garments in any numbering system, the Stor-U-Veyor is operated manually with hand or foot controls; or automatically with a series
540 Keyboard.

 

Stor-U-Veyor Features:
• Bi-directional hand switch - standard
• Series 540 Automatic Keyboard control - optional. Microprocessor control, selects shortest route to item location.
• Die-cast aluminum frames, with 10 slots, 12" pitch, .8# each, rust proof finish.

DOUBLE DECK
Two full levels of hangered garments that operate together at the touch of a button. The Double Deck provides double density for shirts, slacks or other short garments. Available in two configurations: DS, with fixed lower level cast aluminum chain; or DR with removable nylon lower frames. DR model permits mixing of long and short garments as needed.

Double Deck Features:
• Bi-directional hand switch - standard
• Series 540 Automatic Keyboard control - optional. Microprocessor control, selects shortest route to item location.
• Die-cast aluminum frames, with 10 slots, 12" pitch, .8# each, rust proof finish.
• DS model; fixed drop rod every two frames, lower aluminum frame.
• DR model; removable drop rod each frame, lower nylon frame.